The RUBIC UNA is the latest andthe most advanced monitoring system designed to control independent luminairesof emergency and escape route lighting systems. It is dedicated tosmall-to-medium facilities and buildings. Each control unit can handle up to400 luminaires using MPU250 Power submodules. Submodules communicate with theRUBIC UNA via a LAN network.

RUBIC UNA has an integrated touch panel andintuitive graphic menu enabling quick and easy system configuration without theneed to use external software. Each RS address module is assigned an individualnumber/address. The addresses are factory-assigned so no addressing unit isrequired for installation, setting up or maintenance work.

The applicable standards requirethat periodic tests of emergency lighting systems are carried out - both shortfunctional tests and long battery performance tests – and that an event log ismaintained. These events are registered in the non-volatile memory of thecontrol unit and will not be lost even if the battery is disconnected ordrained. At any time, the event log can be saved to an external SD memory cardsupplied with the control unit or downloaded remotely through the implementedcommunication protocols.

Depending on the project set up,the system may include the following components:

• RUBIC UNA control unit

• MPU250 Power submodule

• ZMPU uninterruptible power supply

• fixtures for escape and exit lighting

• dynamic emergency lighting

• MWB potential-free input moduleM

• NS-205/NS-208 5- or 8-port switch

• RS485 signal amplifier

• SmartVISIO service application