HEAT AND SMOKE DETECTOR WITH THE VISUAL SIGNALING DEVICE TSF

The heat and smoke detector is intended for detecting fires in their early phase. The detector has two sensors: heat and smoke. The application of two types of a sensor allows to detect all types of fires quickly and with certainty. Additionally, the detector has the flashing visual signaling device built-in due to which the detector fire alarm is visible from a large distance. The two-sensor detector operates within the AWEX fire alarm system. The element can be installed on the detection loops or stub detection circuits.

The two-sensor smoke and heat detector is equipped with two sensors for fire detection. The smoke detection takes place in a detection chamber equipped with photoelectric diodes. Smoke goes to the chamber during fire. The particles of smoke reflect the light emitted by light emitting diodes which causes that an IR diode receives the signal and transmits it to a microprocessor.

The heat detection takes place by means of 4-thermistor temperature measurement system. A fire alarm is generated when temperature limit is achieved, or in case of quick increase of temperature. Then, it recognizes the type of alarm and transmits it to the supervisory line, and to the control unit.

Characteristics of the heat and smoke detector:

• Sensitivity degree and the temperature class comply with EN 54.
• Recognition of the state of soiling.
• Regulation of alarm threshold which compensates the influence of the environment.
• Indication of an alarm by means of the LED diode.
• Additional LED diodes for the testing state.
• External status indicator.
• Integrated short-circuit isolator.
• A casing with a low profile.
• Operation in the addressable systems.

USEFULNESS FOR TEST FIRES DETECTING:
TF1, TF2, TF3, TF4, TF5, TF6, TF7, TF8, TF9

SMOKE DETECTION:
optical, scattering

HEAT DETECTOR CLASS:
A1R

HEAT DETECTION:
overload, differential

POWER SUPPLY:
24 V DC ± 25%

STANDBY CURRENT:
<160 μA

ALARM CURRENT:
<2 mA

WORKING TEMPERATURE:
from -25°C to 55°C

PROTECTION LEVEL:
IP 20

ACCEPTABLE RELATIVE HUMIDITY:
95% at the temp. of 35°C without condensation

VISUAL SIGNALING:
green LED diodes, red LED FLASH diode

DIMENSION:
Ø110 x 51 mm

WEIGHT:
200 g

DETECTOR COLOUR:
white

PRODUCT CODE:
FSD0000006