Data Sheet
HEAT AND SMOKE DETECTOR TS
Manual
HEAT AND SMOKE DETECTOR TS
The heat and smoke detector is intended for detecting fires in their early phase. The detector has two sensors: heat and smoke. The application of two types of a sensor allows to detect all types of fires quickly and with certainty. The detector operates within the AWEX fire alarm system. The element can be installed on the detection loops or stub detection circuits.
The smoke and heat detector with two sensors is equipped with two sensors which detect fire. The smoke detection takes place in a detection chamber equipped with photoelectric diodes. Smoke goes to the chamber during fire. The particles of smoke reflect the light emitted by light emitting diodes which causes that an IR diode receives the signal and transmits it to a microprocessor. The heat detection takes place by means of 4-thermistor temperature measurement system. A fire alarm is generated when temperature limit is achieved, or in case of quick increase of temperature. Then, it recognizes the type of alarm and transmits it to the supervisory line, and to the control unit.
Characteristics of the heat and smoke detector:
USEFULNESS FOR TEST FIRES DETECTING:
TF1, TF2, TF3, TF4, TF5, TF6, TF7, TF8, TF9
SMOKE DETECTION:
optical, scattering
HEAT DETECTOR CLASS:
A1R
HEAT DETECTION:
overload, differential
POWER SUPPLY:
24 V DC ± 25%
STANDBY CURRENT:
<160 μA
ALARM CURRENT:
<550 μA
WORKING TEMPERATURE:
from -25°C to 55°C
PROTECTION LEVEL:
IP 20
ACCEPTABLE RELATIVE HUMIDITY:
95% at the temp. of 35°C without condensation
VISUAL SIGNALLING:
green LED diodes, red LED diodes
DIMENSION:
Ø110 x 51 mm
WEIGHT:
200 g
DETECTOR COLOUR:
white
PRODUCT CODE:
FSD0000003
HEAT AND SMOKE DETECTOR TS
HEAT AND SMOKE DETECTOR TS